DocBook 5.1: The Definitive Guide  (Version 1.5.3 for DocBook 5.1)

Chapter 2. Creating DocBook Documents

$Revision$

This chapter explains in concrete, practical terms how to make DocBook documents. It’s an overview of all the kinds of markup that are possible in DocBook documents. It explains how to create several kinds of DocBook documents: books, sets of books, chapters, articles, and reference manual entries. The idea is to give you enough basic information to actually start writing. The information here is intentionally skeletal; you can find the details in the reference section of this book.

2.1. Making an XML Document

An XML document consists of an optional XML declaration, an optional Document Type Declaration, which includes an optional internal subset, and a document (or root) element. We’ll discuss each of these in turn.

In XML vocabularies like DocBook, which are defined with RELAX NG (and also in the case of vocabularies defined with W3C’s XML Schema), it is common to omit the Document Type Declaration entirely. The Document Type Declaration associates a document with a particular Document Type Definition (DTD).

2.1.1. An XML Declaration

XML documents often begin with an XML declaration that identifies a few simple aspects of the document, for example:

<?xml version="1.0" encoding="utf-8"?>

Identifying the version of XML ensures that future changes to the XML specification will not alter the semantics of this document. The encoding declaration tells the processor what character encoding this document uses. It must match the actual encoding that you use. The complete details of the XML declaration are described in the W3C standard, Extensible Markup Language (XML) 1.0 [XML].

If your document uses XML 1.0 and an encoding of either utf-8 or utf-16, the XML declaration is not required. But it is never wrong to include it. If you do not include an XML declaration, your document must conform to XML 1.0. If you want to use XML 1.1, you must include an XML declaration and specify version="1.1" in it.

The XML declaration is syntactically similar to a processing instruction, but it is not one. The XML declaration, if it is present, must be absolutely the first thing in your document and it may not appear anywhere else.

2.1.2. A Document Type Declaration

XML documents don’t require a DTD, and if you are using RELAX NG, often they will not include one. Historically, DocBook XML documents have almost always had one.

The Document Type Declaration identifies what the root element of the document will be and may specify the DTD that should be used when parsing the document. A typical Document Type Declaration for a DocBook V4.5 document looks like this:

<?xml version='1.0'?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
               "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">

This declaration indicates that the root element will be book and that the DTD used will be DocBook V4.5, identified with both its public and system identifiers. In this example, the DTD is identified with an HTTP URI. System identifiers in XML must be URIs. Almost all systems accept filenames and interpret them locally as file: URLs, but it’s always correct to fully qualify them.

You can specify a DTD for DocBook V5.0 documents:

<?xml version='1.0'?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V5.0//EN"
               "http://www.oasis-open.org/docbook/xml/5.0/docbook.dtd">

But the limited constraints that can be expressed in DTDs mean that the resultant document may or may not really be valid DocBook V5.0. The normative schema for DocBook V5.0 is the RELAX NG grammar with its Schematron annotations.

The only reason to use a DTD with DocBook V5.0 is if your editing environment (or other tool) requires one, for example, for syntax-directed editing. If you’re using a tool that requires DTDs, check with the vendor, as maybe a more recent version is available that supports RELAX NG.

2.1.3. An Internal Subset

Even if you aren’t using the DTD version of DocBook V5.0, you may still want to use a Document Type Declaration to provide local declarations such as entities:

<?xml version='1.0'?>
<!DOCTYPE book [
<!ENTITY nwalsh "Norman Walsh">
<!ENTITY chap1 SYSTEM "chap1.xml">
<!ENTITY chap2 SYSTEM "chap2.xml">
]>

These declarations form what is known as the internal subset. In this example, the DTD has been omitted, but the two are not mutually exclusive. If you are using a DTD (which is technically known as the external subset), you can include the internal subset immediately after the DTD:

<?xml version='1.0'?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V5.0/EN"
               "http://www.oasis-open.org/docbook/xml/5.0/docbook.dtd" [
<!ENTITY nwalsh "Norman Walsh">
<!ENTITY chap1 SYSTEM "chap1.xml">
<!ENTITY chap2 SYSTEM "chap2.xml">
]>

When both are specified, the internal subset is parsed first. If multiple declarations for an entity occur, the first declaration is used. This means that declarations in the internal subset override declarations in the external subset.

2.1.4. The Document (or Root) Element

All XML documents must have exactly one root element, although it may have sibling comments and processing instructions. If the document has a Document Type Declaration, the root element usually immediately follows it:

<?xml version='1.0'?>
<!DOCTYPE book [
<!ENTITY nwalsh "Norman Walsh">
<!ENTITY chap1 SYSTEM "chap1.xml">
<!ENTITY chap2 SYSTEM "chap2.xml">
]>
<book xmlns="http://docbook.org/ns/docbook" version="5.0">…</book>

The important point is that the root element must be physically present immediately after the Document Type Declaration. You cannot place the root element of the document in an external entity.

2.2. Physical Divisions: Breaking a Document into Separate Files

The rest of this chapter describes how you can break documents into logical chunks, such as books, chapters, sections, and so on. Before we begin, and while the subject of the internal subset is fresh in your mind, let’s take a quick look at how to break documents into separate files.

Actually, we’ve already told you how to do it. If you recall, in the preceding sections we had declarations of the form:

<!ENTITY name SYSTEM "filename">

If you refer to the entity name in your document after this declaration, the system will insert the contents of the file filename into your document at that point. So, if you’ve got a book that consists of three chapters and two appendixes, you might create a file called book.xml, which looks like this:

<!DOCTYPE book [
<!ENTITY chap1 SYSTEM "chap1.xml">
<!ENTITY chap2 SYSTEM "chap2.xml">
<!ENTITY chap3 SYSTEM "chap3.xml">
<!ENTITY appa SYSTEM "appa.xml">
<!ENTITY appb SYSTEM "appb.xml">
]>
<book xmlns="http://docbook.org/ns/docbook" version="5.0">
<title>My First Book</title>
&chap1;
&chap2;
&chap3;
&appa;
&appb;
</book>

You can then write the chapters and appendixes conveniently in separate files.

Documents that you reference with external parsed entities cannot have a Document Type Declaration. For example, Chapter 1 might begin like this:

<chapter xml:id="ch1"><title>My First Chapter</title>
<para>My first paragraph.</para>
…

But it must not begin with its own Document Type Declaration:

<!DOCTYPE chapter>
<chapter xmlns="http://docbook.org/ns/docbook"
         xml:id="ch1">
<title>My First Chapter</title>
<para>My first paragraph.</para>
…

It is also possible to construct documents from different files using XInclude. Recasting the previous example using XInclude yields:

<book xmlns="http://docbook.org/ns/docbook"
      xmlns:xi="http://www.w3.org/2001/XInclude" version="5.0">
<title>My First Book</title>
<xi:include href="chap1.xml"/>
<xi:include href="chap2.xml"/>
<xi:include href="chap3.xml"/>
<xi:include href="appa.xml"/>
<xi:include href="appb.xml"/>
</book>

Notice that we can completely omit the Document Type Declaration in this case, but we must declare the XInclude namespace.

The essential trade-offs between external parsed entities and XInclude are:

  • XInclude can be used in a document that does not have a Document Type Declaration. Many web services applications (ones that rely on SOAP, anyway) forbid a Document Type Declaration and therefore cannot use entities of any sort.

  • The documents referenced by XInclude are complete, free-standing XML documents. They can declare their own local entities using a Document Type Declaration. Documents referenced by external parsed entities cannot have a Document Type Declaration. If they use entities, those entities must be declared in the document that does the including.

  • External parsed entities can have multiple top-level elements. They are not required to be “single rooted.” XIncluded documents must be wholly well-formed XML.

  • All XML validators support external parsed entities. (Validators that do not are not conformant XML processors.) XInclude is a separate specification and may or may not be supported by tools.

  • The XML validator expands entities and therefore “sees” the entire document. This means that ID/IDREF links can freely cross entity boundaries. Because XIncluded documents are free-standing, a document containing an IDREF that crosses a document boundary cannot be valid. It can be well-formed, and processors can do the right thing, but the validator cannot determine that the document is valid. What’s more, the same ID value can occur in several XIncluded documents without causing a validity error. This may cause subsequent processing to fail.

  • As time passes, the use of DTD-based mechanisms like entities is diminishing. If you have an eye on the future, to the extent that it is practical, it is probably better to use XInclude than entities.

2.3. Logical Divisions: The Categories of Elements in DocBook

DocBook elements can be divided broadly into these categories:

Sets
Books
Divisions, which divide books
Components, which divide books or divisions
Sections, which subdivide components
Meta-information elements
Block elements
Inline elements

In the rest of this section, we’ll describe briefly the elements that make up these categories. This section is designed to give you an overview. It is not an exhaustive list of every element in DocBook.

For more information about any specific element and the elements that it may contain, consult the reference page for the element in question.

2.3.1. Sets

A set contains two or more books. It’s the hierarchical top of DocBook. You use the set tag, for example, for a series of books on a single subject that you want to access and maintain as a single unit, such as the manuals for series of computer systems or the documentation (tutorial, reference, etc.) for a programming language. Sets are allowed to contain other sets, though this is not common.

2.3.2. Books

A book is probably the most common top-level element in a document. The DocBook definition of a book is very loose and general. Given the variety of books authored with DocBook and the number of different conventions for book organization used around the world, any attempt to impose a strict ordering of elements would make the content model extremely complex. Therefore, DocBook gives you free rein. You can use a local customization (see Chapter 5, Customizing DocBook) if you want to impose a more strict ordering for your applications.

A book consists of a mixture of the following elements:

Dedication

The dedication pages almost always occur at the front of a book.

Navigational components

There are a couple of component-level elements designed for navigation: toc, for Tables of Contents and Lists of Titles (for lists of figures, tables, examples, etc.); and index, for indexes.

Divisions

Divisions are the first hierarchical level below book. Divisions contain parts and references. A part contains components. A reference contains refentrys. These are discussed more thoroughly in Section 2.8, “Making a Reference Page”.

Books can contain components directly and are not required to contain divisions.

Components

These are the chapter-like elements of a book.

2.3.3. Components

Components are the chapter-like elements of a book or part: preface, chapter, appendix, glossary, and bibliography. An article can also occur at the component level. We describe articles in more detail in Section 2.7, “Making an Article”. Components generally contain block elements and/or sections, and some can contain navigational components and refentrys.

2.3.4. Sections

There are several flavors of sectioning elements in DocBook:

sect1, sect2, sect3, sect4, sect5

The sect1sect5 elements are sectioning elements. They can occur in most component-level elements. These numbered section elements must be properly nested (sect2s can only occur inside sect1s, sect3s can only occur inside sect2s, and so on). There are five levels of numbered sections.

section

The section element is an alternative to numbered sections. The section element is recursive, meaning that you can nest it to any depth desired.

simplesect

In addition to numbered sections, there is the simplesect element. It is a terminal section that can occur at any level, but it cannot have any other sectioning element nested within it.

A distinguishing feature of simplesect is that it does not occur in the Table of Contents.

bridgehead

A bridgehead provides a section title without any containing section.

refsect1refsect3

These elements, which occur only in refentrys, are analogous to the numbered section elements in components. There are only three levels of numbered section elements in a refentry.

refsection

The refsection element is a recursive division in a refentry. It is an alternative to the numbered reference section tags (refsect1refsect3). Like the section element, the refsection element is recursive.

glossdiv, bibliodiv, and indexdiv

The glossary, bibliography, and index elements can be broken into top-level divisions, but not sections. Unlike sections, these elements do not nest.

2.3.5. Meta-Information

All of the elements at the section level and above, and many other elements, include a wrapper for meta-information about the content. That element is named info. In earlier versions of DocBook, there were many similarly named elements for this purpose: bookinfo, chapterinfo, etc. In DocBook V5.0, there is only one.

The meta-information wrapper is designed to contain bibliographic information about the content (author, title, publisher, and so on) as well as other meta-information such as revision histories, keyword sets, and index terms.

An info can contain:

title

The text of the title of a section of a document or of a formal block-level element

titleabbrev

The abbreviation of a title

subtitle

The subtitle of a document

abstract

A summary

address

A real-world address, generally a postal address

annotation

An annotation

artpagenums

The page numbers of an article as published

author

The name of an individual author

authorgroup

A wrapper for author information when a document has multiple authors or collaborators

authorinitials

The initials or other short identifier for an author

bibliocoverage

The spatial or temporal coverage of a document

biblioid

An identifier for a document

bibliomisc

Untyped bibliographic information

bibliomset

A cooked container for related bibliographic information

bibliorelation

The relationship of a document to another

biblioset

A raw container for related bibliographic information

bibliosource

The source of a document

collab

Identifies a collaborator

confgroup

A wrapper for document meta-information about a conference

contractnum

The contract number of a document

contractsponsor

The sponsor of a contract

copyright

Copyright information about a document

date

The date of publication or revision of a document

edition

The name or number of an edition of a document

editor

The name of the editor of a document

extendedlink

An XLink extended link

issuenum

The number of an issue of a journal

itermset

A set of index terms in the meta-information of a document

keywordset

A set of keywords describing the content of a document

legalnotice

A statement of legal obligations or requirements

mediaobject

A displayed media object (video, audio, image, etc.)

orgname

The name of an organization

othercredit

A person or entity, other than an author or editor, credited in a document

pagenums

The numbers of the pages in a book, for use in a bibliographic entry

printhistory

The printing history of a document

productname

The formal name of a product

productnumber

A number assigned to a product

pubdate

The date of publication of a document

publisher

The publisher of a document

publishername

The name of the publisher of a document

releaseinfo

Information about a particular release of a document

revhistory

A history of the revisions to a document

seriesvolnums

Numbers of the volumes in a series of books

subjectset

A set of terms describing the subject matter of a document

volumenum

The volume number of a document in a set (as of books in a set or articles in a journal)

The title, titleabbrev, and subtitle elements can usually appear either immediately before or inside the info wrapper (but not both). This means you don’t need the extra wrapper in the common case where all you want to specify is a title.

2.3.6. Block Elements

The block elements occur immediately below the component and sectioning elements. These are the (roughly) paragraph-level elements in DocBook. They can be divided into a number of categories: lists, admonitions, line-specific environments, synopses of several sorts, tables, figures, examples, and a dozen or more miscellaneous elements.

2.3.6.1. Block versus inline elements

At the paragraph level, it’s convenient to divide elements into two classes, block and inline. From a structural point of view, this distinction is based loosely on their relative size, but it’s easiest to describe the difference in terms of their presentation.

Block elements are usually presented with a paragraph (or larger) break before and after them. Most can contain other block elements, and many can contain character data and inline elements. Paragraphs, lists, sidebars, tables, and block quotations are all common examples of block elements.

Inline elements are generally represented without any obvious breaks. The most common distinguishing mark of inline elements is a font change, but inline elements may present no visual distinction at all. Inline elements contain character data and possibly other inline elements, but they never contain block elements. Inline elements are used to mark up data such as cross-references, filenames, commands, options, subscripts and superscripts, and glossary terms.

2.3.6.2. Lists

There are eight list elements in DocBook:

calloutlist

A list of callouts and their descriptions. The callouts are marks, frequently numbered and typically on a graphic (imageobjectco) or verbatim environment (programlistingco or screenco), that are described in a calloutlist.

bibliolist

A list of bibliography entries (biblioentry or bibliomixed elements).

glosslist

A list of glossary terms and their definitions.

itemizedlist

An unordered (bulleted) list. There are attributes to control the marks used.

orderedlist

A numbered list. There are attributes to control the type of enumeration.

segmentedlist

A repeating set of named items. For example, a list of states and their capitals might be represented as a segmentedlist. Segmented lists consist of segtitles, seglistitems, and segs.

simplelist

An unadorned list of items. simplelists can be inline or arranged in columns.

variablelist

A list of terms and definitions or descriptions. (This list of list types is a variablelist.)

2.3.6.3. Admonitions

There are five types of admonitions in DocBook: caution, important, note, tip, and warning.

All of the admonitions have the same structure: an optional title followed by paragraph-level elements. DocBook does not impose any specific semantics on the individual admonitions. For example, DocBook does not mandate that warnings be reserved for cases where bodily harm can result.

2.3.6.4. Line-specific environments

These environments preserve whitespace and line breaks in the source text. DocBook does not provide the equivalent of HTML’s br tag, so there’s no way to interject a line break into normal running text.

address

The address element is intended for postal addresses. In addition to being line-specific, address contains additional elements suitable for marking up names and addresses: city, country, fax, otheraddr, personname, phone, pob, postcode, state, and street.

literallayout

A literallayout does not have any semantic association beyond the preservation of whitespace and line breaks. In particular, while programlisting and screen are frequently presented in a fixed-width font, a change of fonts is not ordinarily implied by literallayout.

programlisting and programlistingco

The programlisting and programlistingco elements are verbatim environments, usually presented in Courier or some other fixed-width font, for program sources, code fragments, and similar listings. The two elements are the same, except that programlistingco supports markup for callouts.

screen and screenco

The screen and screenco elements are verbatim or literal environments for text screen captures, other fragments of an ASCII display, and similar things. screen is also a frequent catchall for any verbatim text. The two elements are the same, except that screenco supports markup for callouts.

screenshot

screenshot is actually a wrapper for a mediaobject intended for screenshots of a GUI, for example.

synopsis

A synopsis is a verbatim environment for command and function synopses.

2.3.6.5. Examples, figures, and tables

Examples, figures, and tables are supported with the block-level elements: example, informalexample, figure, informalfigure, table, and informaltable.

The distinction between formal and informal elements is that formal elements have titles while informal ones do not.

DocBook supports CALS tables (defined with tgroup, colspec, spanspec, thead, tfoot, tbody, row, entry, entrytbl, and caption) and HTML tables (defined with col, colgroup, thead, tfoot, tbody, tr, td, and caption).

2.3.6.6. Paragraphs

There are three paragraph elements: para, simpara (simple paragraphs may not contain other block-level elements), and formalpara (formal paragraphs have titles).

2.3.6.7. Equations

There are two block-equation elements, equation and informalequation (for inline equations, use inlineequation).

Informal equations don’t have titles. For reasons of backward compatibility, equations are not required to have titles. However, it may be more difficult for some stylesheet languages to properly enumerate equations if they lack titles.

2.3.6.8. Graphics and media

Graphics occur most frequently in figures and screenshots, but they can also occur outside those wrappers. DocBook considers a mediaobject a block element, even if it occurs in an inline context. For graphics that you want to be represented inline, use inlinemediaobject.

Media objects (and inline media objects) can contain five kinds of content:

audioobject

A wrapper for audio data and its associated meta-information. (Which contains audiodata.)

imageobject

A wrapper for image data and its associated meta-information. (Which contains imagedata.)

imageobjectco

A wrapper for an image object with callouts. (Which contains imagedata and callout-related information).

videoobject

A wrapper for video data and its associated meta-information. (Which contains videodata.)

textobject

A wrapper for a text description of an object and its associated meta-information. (Which contains textdata.)

The audio, image, video, and text data in a media object are, by definition, alternatives.

2.3.6.9. Questions and answers

The qandaset element is suitable for FAQs (Frequently Asked Questions) and other similar collections of questions and answers. Each qandaentry contains a question and its answer(s). The set of questions and answers can be divided into sections with qandadiv.

2.3.6.10. Procedures and tasks

A procedure contains steps, which may contain substeps or stepalternatives.

The task element is a wrapper around the procedure element that provides additional, optional elements, including tasksummary, taskprerequisites, example, and taskrelated.

2.3.6.11. Synopses

DocBook provides a number of elements for describing command, function, and class synopses:

cmdsynopsis

A syntax summary for a software command. A cmdsynopsis contains arg, command, and group elements. For long synopses, the sbr tag can be used to indicate where a break should occur. Complex synopses can be composed from synopfragments.

funcsynopsis

The syntax summary for a function definition. A function synopsis consists of one or more funcprototypes and may include additional, literal information in a funcsynopsisinfo. Each prototype consists of modifiers, a funcdef, and a collection of paramdef, varargs, and/or void elements.

classsynopsis

The syntax summary for a class definition. A class synopsis consists of one or more ooclass, ooexception, or oointerface elements followed by zero or more constructorsynopsis, destructorsynopsis, fieldsynopsis, and methodsynopsis elements Like funcsynopsis, it may include additional, literal information, in this case, in a classsynopsisinfo.

2.3.6.12. Miscellaneous block elements

The following block elements are also available:

blockquote

A block quotation. Block quotations may have attributions.

epigraph

A short introduction, typically a quotation, at the beginning of a document or component. The epigraph element may include an attribution element.

msgset

A set of related error messages.

sidebar

A sidebar.

2.3.7. Inline Elements

Users of DocBook are provided with a surfeit of inline elements. Inline elements are used to mark up running text. In published documents, inline elements often cause a font change or other small change, but they do not cause line or paragraph breaks.

In practice, writers generally settle on the tagging of inline elements that suits their time and subject matter. This may be a large number of elements or only a handful. What is important is that you choose to mark up not every possible item, but only those for which distinctive tagging will be useful in the production of the finished document for the readers who will search through it.

The following comprehensive list may be a useful tool for the process of narrowing down the elements that you will choose to mark up; it is not intended to overwhelm you by its sheer length. For convenience, we’ve divided the inlines into several subcategories.

The classification used here is not meant to be authoritative, only helpful in providing a feel for the nature of the inlines. Several elements appear in more than one category, and arguments could be made to support the placement of additional elements in other categories or entirely new categories.

2.3.7.1. Traditional publishing inlines

These inlines identify things that commonly occur in general writing:

abbrev

An abbreviation, especially one followed by a period.

acronym

An often pronounceable word made from the initial (or selected) letters of a name or phrase.

emphasis

Emphasized text.

footnote

A footnote. The location of the footnote element identifies the location of the first reference to the footnote. Additional references to the same footnote can be inserted with footnoteref.

phrase

A span of text.

quote

An inline quotation.

trademark

A trademark.

2.3.7.2. Cross-references and linking

The cross-reference inlines identify both explicit cross-references and links (e.g., link and xref) and implicit cross-references (e.g., citation and glossterm).

anchor

A spot in the document.

biblioref

A cross-reference to a bibliographic entry.

citation

An inline bibliographic reference to another published work.

citerefentry

A citation to a reference page.

citetitle

The title of a cited work.

firstterm

The first occurrence of a term.

glossterm

A glossary term.

link

A hypertext link.

olink

A link that addresses its target indirectly.

xref

A cross reference to another part of the document.

DocBook provides a number of common attributes to facilitate cross-references and hypertext linking. Broadly speaking, these facilities break down into three categories: standard XML ID/IDREF linking, [XLink], and DocBook-specific markup. These different and sometimes overlapping approaches exist because DocBook's long history predates many modern hypertext standards.

The easiest and most interoperable way to identify the target of a link (the thing being linked to) is with an xml:id attribute. Use the anchor element if you need to place a link target at a specific point in text where there isn't a convenient wrapper element on which to hang the ID.

XML ID/IDREF linking is accomplished with the linkend attribute, most frequently on the link or xref elements. On a link, the linkend attribute establishes a hypertext link from the text of the link to the element with the xml:id attribute specified in the linkend attribute. The semantics of xref are analogous, but the link text is generated automatically. For example, an xref to an xml:id on a figure element might generate link text like “Figure 3.1, Title of Figure”. The exact nature of the generated text is controlled by the tool processing DocBook.

The xml:id for this section is “s.inline.xref”. The following table demonstrates how link and xref work:

MarkupGenerated result
Link to <link linkend="s.inline.xref">the current</link> section. Link to the current section.
Link to <xref linkend="s.inline.xref"/>.Link to Section 2.3.7.2, “Cross-references and linking”.

The linkend attribute can be used on most inline elements, not just on link and xref. Used in this way, the element on which the linkend attribute appears behaves like a link. (This is a convenient alternative that avoids having to place the other inline element inside a link or place a link inside it.)

Note

DocBook allows links to occur more-or-less ubiquitously. As a consequence, it is possible to nest one link inside another. This is not forbidden, but the semantics of such nested links are undefined.

For cross-references to a bibliography entry, the citation and biblioref elements work analogously to the link and xref elements. Bibliographic references often require very specific formatting; having specific elements for this purpose simplifies some processing.

For cross-references to a glossary entry, firstterm or glossterm are used. You can use linkend on those elements, but sometimes the links can be constructed implicitly by the processor.

Titles are often highlighted (in printed books they are usually italicized, for example). The citetitle element is used to identify titles. It may be used with or without linking attributes.

That leaves olink and [XLink]. The olink element predates, and is largely superseded by, XLink. The semantics of olink are described in detail on its reference page.

XLink is a separate, general purpose XML linking standard. It provides a rich and powerful vocabulary for describing a wide variety of linking scenarios. DocBook V5.1 has complete support for XLink and allows the XLink attributes on most elements.

The simplest and most common use of XLink in DocBook is simply to place the xlink:href attribute on an inline element. The value of the xlink:href attribute is technically an XPointer (see [XPointer Framework]), though this is often simply a URI. DocBook places no constraints on the kinds of XPointers that can be used, though not all processors will be able to address all XPointers, so make sure you are satisfied that you can process the ones you use.

Where linkend on an element forms an intra-document link (exclusively), xlink:href usually forms an inter-document link.

There's nothing that prevents an XLink from being an intra-document link, using the bare fragment identifier form. The salient difference between using an ID/IDREF link (linkend) and a bare fragment identifier (xlink:href) is that the former is always checked by the validator and the latter never is. This means that errors in the latter form are less likely to be detected by the processor.

Two examples of simple XLinks:

MarkupGenerated result
Link to the <link xlink:href="http://docbook.org/">DocBook</link> website. Link to the DocBook website.
Link to <link xlink:href="#s.inline.xref">this section</link>. Link to this section.

XLink allows authors to describe some very useful linking structures that have long been ignored by web browsers. Consider, for example:

<para>What about
<citetitle xlink:type="extended">
  <link xlink:type="locator" xlink:href="http://docbook.org/"
        xlink:label="target" xlink:title="DocBook.org"/>
  <link xlink:type="locator" xlink:href="http://en.wikipedia.org/wiki/DocBook"
        xlink:label="target" xlink:title="DocBook on Wikipedia"/>
  <phrase xlink:type="resource" xlink:label="source">DocBook</phrase>
  <link xlink:type="arc" xlink:from="source" xlink:to="target"/>
</citetitle>
and
<citetitle xml:id="xquery">XQuery</citetitle>.
</para>

This defines a link with one source “DocBook” and two targets, the DocBook website and the DocBook page on http://en.wikipedia.org/. It can get even more interesting. With this extendedlink somewhere in the document, for example in the info element:

<extendedlink xlink:type="extended">
  <locator xlink:type="locator" xlink:href="http://www.w3.org/TR/XQuery"
           xlink:label="target" xlink:title="XQuery specification"/>
  <locator xlink:type="locator" xlink:href="http://www.w3.org/XML/Query/"
           xlink:label="target" xlink:title="XQuery WG"/>
  <locator xlink:type="locator" xlink:href="http://en.wikipedia.org/wiki/XQuery"
           xlink:label="target" xlink:title="XQuery on Wikipedia"/>
  <locator xlink:type="locator" xlink:href="#xquery" xlink:label="source"/>
  <arc xlink:type="arc" xlink:from="source" xlink:to="target"/>
</extendedlink>

The word “XQuery” in the preceding example becomes a multi-ended link too! XLink allows links to be defined from either end and with either inline or standoff markup.

Support (or lack thereof!) for these more complex forms is alas, highly variable. Check to make sure your processor can handle the forms you use.

One final note on XLink. The XLink specification uses an attribute, xlink:title, to contain the human-readable titles of locators, arcs, etc. DocBook assiduously avoids placing human-readable content in attribute values because they cannot contain inline graphics for non-Unicode characters and they complicate translation efforts. Nevertheless, for compatibility, the xlink:title attribute is used in XLink support. Consider the implications of placing human-readable titles in that attribute carefully.

2.3.7.3. Markup

These inlines are used to mark up text for special presentation:

foreignphrase

A word or phrase in a language other than the primary language of the document

wordasword

A word meant specifically as a word and not representing anything else

computeroutput

Data, generally text, displayed or presented by a computer

literal

Inline text that is some literal value

markup

A string of formatting markup in text that is to be represented literally

prompt

A character or string indicating the start of an input field in a computer display

replaceable

Content that may or must be replaced by the user

tag

A component of XML (or SGML) markup

userinput

Data entered by the user

2.3.7.4. Mathematics

DocBook does not define a complete set of elements for representing equations. The Mathematical Markup Language (MathML) [MathML] is a standard that defines a comprehensive grammar for representing equations. MathML markup may be used in any of the equation elements (equation,informalequation, and inlineequation). For simple mathematics equations that do not require extensive markup, the mathphrase element is an alternative.

inlineequation

A mathematical equation or expression occurring inline

mathphrase

A mathematical phrase that can be represented with ordinary text and a small amount of markup

subscript

A subscript (as in H2O, the molecular formula for water)

superscript

A superscript (as in x2, the mathematical notation for x multiplied by itself)

2.3.7.5. User interfaces

These elements describe aspects of a user interface:

accel

A graphical user interface (GUI) keyboard shortcut

guibutton

The text on a button in a GUI

guiicon

A graphic and/or text appearing as an icon in a GUI

guilabel

The text of a label in a GUI

guimenu

The name of a menu in a GUI

guimenuitem

The name of a terminal menu item in a GUI

guisubmenu

The name of a submenu in a GUI

keycap

The text printed on a key on a keyboard

keycode

The internal, frequently numeric, identifier for a key on a keyboard

keycombo

A combination of input actions

keysym

The symbolic name of a key on a keyboard

menuchoice

A selection or series of selections from a menu

mousebutton

The conventional name of a mouse button

shortcut

A key combination for an action that is also accessible through a menu

2.3.7.6. Programming languages and constructs

Many of the technical inlines in DocBook are related to programming:

classname

The name of a class, in the object-oriented programming sense

constant

A programming or system constant

errorcode

An error code

errorname

An error name

errortype

The classification of an error message

function

The name of a function or subroutine, as in a programming language

literal

Inline text that is some literal value

msgtext

The actual text of a message component in a message set

parameter

A value or a symbolic reference to a value

property

A unit of data associated with some part of a computer system

replaceable

Content that may or must be replaced by the user

returnvalue

The value returned by a function

symbol

A name that is replaced by a value before processing

token

A unit of information

type

The classification of a value

varname

The name of a variable

2.3.7.7. Operating systems

These inlines identify parts of an operating system, or an operating environment:

application

The name of a software program

command

The name of an executable program or other software command

envar

A software environment variable

filename

The name of a file

msgtext

The actual text of a message component in a message set

option

An option for a software command

parameter

A value or a symbolic reference to a value

prompt

A character or string indicating the start of an input field in a computer display

systemitem

A system-related item or term

2.3.7.8. General purpose

There are also a number of general-purpose technical inlines:

application

The name of a software program

database

The name of a database, or part of a database

email

An email address

filename

The name of a file

hardware

A physical part of a computer system

literal

Inline text that is some literal value

option

An option for a software command

optional

Optional information

replaceable

Content that may or must be replaced by the user

symbol

A name that is replaced by a value before processing

token

A unit of information

type

The classification of a value

2.3.8. Content model patterns

Throughout the element reference pages, you will see groups of elements identified thematically: “admonition elements”, “bibliography inlines”, etc. For reference, here is what those groups consist of:

Bibliography inlines

A choice of one of the following: citation, citerefentry, citetitle, citebiblioid, author, person, personname, org, orgname, editor, or jobtitle.

Computer-output inlines

A choice of one of the following: inlinemediaobject, remark, xref, link, olink, anchor, biblioref, alt, trademark, abbrev, acronym, date, emphasis, footnote, footnoteref, foreignphrase, phrase, quote, subscript, superscript, wordasword, annotation, firstterm, glossterm, indexterm, coref, prompt, envar, filename, command, computeroutput, userinput, replaceable, package, parameter, termdef, nonterminal, systemitem, option, optional, property, co, tag, markup, token, symbol, literal, code, constant, email, or uri.

Error inlines

A choice of one of the following: errorcode, errortext, errorname, or errortype.

Graphic inlines

A choice of one of the following: inlinemediaobject.

GUI inlines

A choice of one of the following: guiicon, guibutton, guimenuitem, guimenu, guisubmenu, guilabel, menuchoice, or mousebutton.

Indexing inlines

A choice of one of the following: indexterm.

Keyboard inlines

A choice of one of the following: keycombo, keycap, keycode, keysym, shortcut, or accel.

Linking inlines

A choice of one of the following: xref, link, olink, anchor, or biblioref.

Markup inlines

A choice of one of the following: tag, markup, token, symbol, literal, code, constant, email, or uri.

Math inlines

A choice of one of the following: inlineequation.

Object-oriented programming inlines

A choice of one of the following: ooclass, ooexception, or oointerface.

Operating system inlines

A choice of one of the following: prompt, envar, filename, command, computeroutput, or userinput.

Product inlines

A choice of one of the following: trademark, productnumber, productname, database, application, or hardware.

Programming inlines

A choice of one of the following: function, parameter, varname, returnvalue, type, classname, exceptionname, interfacename, methodname, modifier, initializer, ooclass, ooexception, or oointerface.

Publishing inlines

A choice of one of the following: abbrev, acronym, date, emphasis, footnote, footnoteref, foreignphrase, phrase, quote, subscript, superscript, wordasword, firstterm, glossterm, or coref.

Technical inlines

A choice of one of the following: replaceable, package, parameter, termdef, nonterminal, systemitem, option, optional, or property.

Ubiquitous inlines

A choice of one of the following: inlinemediaobject, remark, xref, link, olink, anchor, biblioref, alt, trademark, abbrev, acronym, date, emphasis, footnote, footnoteref, foreignphrase, phrase, quote, subscript, superscript, wordasword, annotation, firstterm, glossterm, indexterm, or coref.

User-input inlines

A choice of one of the following: inlinemediaobject, remark, xref, link, olink, anchor, biblioref, alt, trademark, abbrev, acronym, date, emphasis, footnote, footnoteref, foreignphrase, phrase, quote, subscript, superscript, wordasword, annotation, firstterm, glossterm, indexterm, coref, prompt, envar, filename, command, computeroutput, userinput, replaceable, package, parameter, termdef, nonterminal, systemitem, option, optional, property, co, tag, markup, token, symbol, literal, code, constant, email, uri, guiicon, guibutton, guimenuitem, guimenu, guisubmenu, guilabel, menuchoice, mousebutton, keycombo, keycap, keycode, keysym, shortcut, or accel.

Admonition elements

A choice of one of the following: caution, important, note, tip, or warning.

Formal elements

A choice of one of the following: example, figure, table, or equation.

Graphic elements

A choice of one of the following: mediaobject or screenshot.

“Info” elements

A choice of one of the following: abstract, address, artpagenums, author, authorgroup, authorinitials, bibliocoverage, biblioid, bibliosource, collab, confgroup, contractsponsor, contractnum, copyright, cover, date, edition, editor, issuenum, keywordset, legalnotice, mediaobject, org, orgname, othercredit, pagenums, printhistory, pubdate, publisher, publishername, releaseinfo, revhistory, seriesvolnums, subjectset, volumenum, annotation, extendedlink, bibliomisc, bibliomset, bibliorelation, biblioset, itermset, productname, or productnumber.

Informal elements

A choice of one of the following: informalexample, informalfigure, informaltable, or informalequation.

List elements

A choice of one of the following: itemizedlist, orderedlist, procedure, simplelist, variablelist, segmentedlist, glosslist, bibliolist, calloutlist, or qandaset.

Paragraph elements

A choice of one of the following: anchor, para, formalpara, or simpara.

Publishing elements

A choice of one of the following: sidebar, blockquote, address, or epigraph.

Synopsis elements

A choice of one of the following: funcsynopsis, classsynopsis, methodsynopsis, constructorsynopsis, destructorsynopsis, fieldsynopsis, or cmdsynopsis.

Technical elements

A choice of one of the following: procedure, task, productionset, constraintdef, or msgset.

Verbatim elements

A choice of one of the following: screen, literallayout, programlistingco, screenco, programlisting, or synopsis.

2.4. Roots: Starting Your DocBook Document

There’s one final detail of the physical and logical structures of DocBook that we’ve left out: where can your document begin? In other words, what are the valid “document elements” of DocBook documents? Naturally, you can start at set and book, but can you also start at chapter? What about para or personname?

If you come to DocBook from the DTD days, this question may seem odd. A DTD doesn’t provide any facility to impose constraints on where a document can begin. If the element occurs in the DTD, you can start with it.

RELAX NG does give us the ability to impose such constraints. In fact, it requires that we do. Of course, we could make the constraint vacuous by listing every possible element as a potential document element.

But, on reflection, that’s not necessarily the best choice. It’s valuable to have metadata associated with documents, so only elements with an info element can be root elements, but not every element with an info element is currently included. In DocBook V5.0 the following elements are available: acknowledgements, appendix, article, bibliography, book, chapter, colophon, dedication, glossary, index, para, part, preface, refentry, reference, refsect1, refsect2, refsect3, refsection, sect1, sect2, sect3, sect4, sect5, section, set, setindex, and toc.

With the next point release of DocBook, V5.1, the technical committee may take the position that any element that can contain an info wrapper can be a document element. This would dramatically expand the list of valid root elements.

2.5. Making a DocBook Book

A typical book, in English at least, consists of some meta-information in an info (title, author, copyright, etc.), one or more prefaces, several chapters, and perhaps a few appendixes. A book may also contain bibliographys, glossarys, indexes, and a colophon.

Example 2.1, “A typical book” shows the structure of a typical book. Additional content is required where the ellipses occur.

Example 2.1. A typical book
<book>
<info>
  <title>My First Book</title>
  <author>
    <personname><firstname>Jane</firstname><surname>Doe</surname></personname>
  </author>
  <copyright><year>2010</year><holder>Jane Doe</holder></copyright>
</info>
<preface><title>Foreword</title> ... </preface>
<chapter> ... </chapter>
<chapter> ... </chapter>
<chapter> ... </chapter>
<appendix> ... </appendix>
<appendix> ... </appendix>
<index> ... </index>
</book>

2.6. Making a Chapter

chapters, prefaces, and appendixes all have a similar structure. They consist of a title, possibly some additional meta-information, and any number of block-level elements followed by any number of top-level sections. Each section may in turn contain any number of block-level elements followed by any number from the next section level, as shown in Example 2.2, “A typical chapter”.

Example 2.2. A typical chapter
<chapter><title>My Chapter</title>
  <para> ... </para>
  <section><title>First Section</title>
    <para> ... </para>
    <example> ... </example>
  </section>
</chapter>

2.7. Making an Article

For documents smaller than a book, such as journal articles, white papers, or technical notes, article is frequently the most logical starting point. The body of an article is essentially the same as the body of a chapter or any other component-level element, as shown in Example 2.3, “A typical article”.

articles may include appendixes, bibliographys, indexes, and glossarys.

Example 2.3. A typical article
<article>
  <info>
    <title>My Article</title>
    <author><honorific>Dr</honorific><firstname>Emilio</firstname>
            <surname>Lizardo</surname></author>
  </info>
  <para> ... </para>
  <section><title>On the Possibility of Going Home</title>
    <para> ... </para>
  </section>
  <bibliography> ... </bibliography>
</article>

2.8. Making a Reference Page

The reference page or manual page in DocBook was inspired by, and in fact designed to reproduce, the common UNIXmanpage” concept. (We use the word “page” loosely here to mean a document of variable length containing reference material on a specific topic.) DocBook is rich in markup tailored for such documents, which often vary greatly in content, however well structured they may be. To reflect both the structure and the variability of such texts, DocBook specifies that reference pages have a strict sequence of parts, even though several of them are actually optional.

Of the following sequence of elements that may appear in a refentry, only two are obligatory: refnamediv and either refsect1 or refsection.

info

The info element contains meta-information about the reference page (which should not be confused with refmeta, which it precedes). It marks up information about the author of the document, or the product to which it pertains, or the document’s revision history, or other such information.

refmeta

refmeta contains a title for the reference page (which may be inferred if the refmeta element is not present) and an indication of the volume number in which this reference page occurs. The manvolnum is a very UNIX-centric concept. In traditional UNIX documentation, the subject of a reference page is typically identified by name and volume number; this allows you to distinguish between the uname command, “uname(1)” in volume 1 of the documentation, and the uname function, “uname(3)” in volume 3.

Additional information of this sort, such as conformance or vendor information specific to the particular environment you are working in, may be stored in refmiscinfo.

refnamediv

The first obligatory element is refnamediv, which is a wrapper for information about whatever you’re documenting, rather than the document itself. It can begin with a refdescriptor if several items are being documented as a group and the group has a name. The refnamediv must contain at least one refname, that is, the name of whatever you’re documenting, and a single short statement that sums up the use or function of the item(s) at a glance: its refpurpose. Also available is the refclass, intended to detail the operating system configurations that the software element in question supports.

If no refentrytitle is given in the refmeta, the title of the reference page is the refdescriptor, if present, or the first refname.

refsynopsisdiv

A refsynopsisdiv is intended to provide a quick synopsis of the topic covered by the reference page. For commands, this is generally a syntax summary of the command, and for functions, the function prototype, but other options are possible. A title is allowed, but not required, presumably because the application that processes reference pages will generate the appropriate title if it is not given. In traditional UNIX documentation, its title is always “Synopsis.

refsect1refsect3

Within refentrys, there are only three levels of sectioning elements: refsect1, refsect2, and refsect3.

refsection

As with sect1, sect2, etc., there is a recursive version of the reference section elements: refsection.

Example 2.4, “A sample reference page” shows the beginning of a refentry that illustrates one possible reference page.

Example 2.4. A sample reference page
<refentry xml:id="printf">
  <refmeta>
    <refentrytitle>printf</refentrytitle>
      <manvolnum>3S</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>printf</refname>
    <refname>fprintf</refname>
    <refname>sprintf</refname>
    <refpurpose>print formatted output</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <funcsynopsis>
      <funcsynopsisinfo>
        #include <stdio.h>
      </funcsynopsisinfo>

      <funcprototype>
        <funcdef>int <function>printf</function></funcdef>
        <paramdef>const char *<parameter>format</parameter></paramdef>
        <varargs/>
      </funcprototype>

      <funcprototype>
        <funcdef>int <function>fprintf</function></funcdef>
        <paramdef>FILE *<parameter>strm</parameter></paramdef>
        <paramdef>const char *<parameter>format</parameter></paramdef>
        <varargs/>
      </funcprototype>

      <funcprototype>
        <funcdef>int <function>sprintf</function></funcdef>
        <paramdef>char *<parameter>s</parameter></paramdef>
        <paramdef>const char *<parameter>format</parameter></paramdef>
        <varargs/>
      </funcprototype>
    </funcsynopsis>

  </refsynopsisdiv>

  <refsect1><title>Description</title>
    <para><indexterm><primary>functions</primary>
                     <secondary>printf</secondary></indexterm>
          <indexterm><primary>printing function</primary></indexterm>

      <function>printf</function> places output on the standard
      output stream stdout.
    </para>
  </refsect1>
</refentry>

2.9. Making Front and Back Matter

DocBook contains markup for the usual variety of front and back matter necessary for books and articles: indexes, glossaries, bibliographies, and tables of contents. In many cases, these components are generated automatically, at least in part, from your document by an external processor, but you can create them by hand, and in either case, store them in DocBook.

Some forms of back matter, such as indexes and glossaries, usually require additional markup in the document to make generation by an application possible. Bibliographies are usually composed by hand like the rest of your text, unless you are automatically selecting bibliographic entries out of some larger database. Our principal concern here is to acquaint you with the kind of markup you need to include in your documents if you want to construct these components.

Front matter, like the table of contents, is almost always generated automatically from the text of a document by the processing application. If you need information about how to mark up a table of contents in DocBook, please consult the reference page for toc.

2.9.1. Making an Index

In some highly structured documents such as reference manuals, you can automate the whole process of generating an index successfully without altering or adding to the original source. You can design a processing application to select the information and compile it into an adequate index. But this is rare.

In most cases—and even in the case of some reference manuals—a useful index still requires human intervention to mark occurrences of words or concepts that will appear in the text of the index.

2.9.1.1. Marking index terms

DocBook distinguishes two kinds of index markers: those that are singular and result in a single page entry in the index itself, and those that are multiple and refer to a range of pages.

You put a singular index marker where the subject it refers to actually occurs in your text:

<para>
  <indexterm><primary>Big Cats</primary>
  <secondary>Tigers</secondary></indexterm>
  The tiger is a very large cat indeed.
</para>

This index term has two levels, primary and secondary. They correspond to an increasing amount of indented text in the resultant index. DocBook allows for three levels of index terms, with the third labeled tertiary.

There are two ways that you can index a range of text. The first is to put index marks at both the beginning and end of the discussion. The mark at the beginning asserts that it is the start of a range, and the mark at the end refers back to the beginning. In this way, the processing application can determine what range of text is indexed. Here’s the previous tiger example recast as starting and ending index terms:

<para>
  <indexterm xml:id="tiger-desc" class="startofrange">
  <primary>Big Cats</primary>
  <secondary>Tigers</secondary></indexterm>
  The tiger is a very large cat indeed…
</para>
⋮
<para>
So much for tigers<indexterm startref="tiger-desc" class="endofrange"/>.
Let's talk about leopards.
</para>

Note that the mark at the start of the range identifies itself as the start of a range with the class attribute, and provides an xml:id. The mark at the end of the range points back to the start.

Another way to mark up a range of text is to specify that the entire content of an element, such as a chapter or section, is the complete range. In this case, all you need is for the index term to point to the xml:id of the element that contains the content in question. The zone attribute of indexterm provides this functionality.

One of the interesting features of this method is that the actual index marks do not have to occur anywhere near the text being indexed. It is possible to collect all of them together, for example, in one file, but it is not invalid to have the index marker occur near the element it indexes.

Suppose the discussion of tigers in your document comprises a whole text object (such as a sect1 or a chapter) with an xml:id value of tiger-desc. You can put the following tag anywhere in your document to index that range of text:

<indexterm zone="tiger-desc">
<primary>Big Cats</primary>
<secondary>Tigers</secondary></indexterm>

DocBook also contains markup for index hits that point to other index hits (e.g., “See Cats, big” or “See also Lions”). See the reference pages for see and seealso.

2.9.1.2. Printing an index

After you have added the appropriate markup to your document, an external application can use this information to build an index. The resultant index must have information about the page numbers on which the concepts appear. It’s usually the document formatter that builds the index. In this case, it may never be instantiated in DocBook.

However, there are applications that can produce an index marked up in DocBook. The following example includes some one- and two-level indexentry elements (which correspond to the primary and secondary levels in the indexterms themselves) that begin with the letter D:

<index><title>Index</title>
  <indexdiv><title>D</title>
    <indexentry>
      <primaryie>database (bibliographic), 253, 255</primaryie>
         <secondaryie>structure, 255</secondaryie>
         <secondaryie>tools, 259</secondaryie>
    </indexentry>
    <indexentry>
      <primaryie>dates (language specific), 179</primaryie>
    </indexentry>
    <indexentry>
      <primaryie>DC fonts, <emphasis>172</emphasis>, 177</primaryie>
         <secondaryie>Math fonts, 177</secondaryie>
    </indexentry>
  </indexdiv>
</index>

The structure of indexentry is parallel to the structure of indexterm. Where indexterm has primary, secondary, tertiary, see, and seealso, indexentry has primaryie, secondaryie, tertiaryie, seeie, and seealsoie.

2.9.2. Making a Glossary

A glossary, like a bibliography, is often constructed by hand. However, some applications are capable of building a skeletal index from glossary term markup in the document. If all of your terms are defined in some glossary database, it may even be possible to construct the complete glossary automatically.

To enable automatic glossary generation, or simply automatic linking from glossary terms in the text to glossary entries, you must add markup to your documents. In the text, you mark up a term for compilation later with the inline glossterm tag. This tag can have a linkend attribute whose value is the ID of the actual entry in the glossary.[1]

For instance, if you have this markup in your document:

<glossterm linkend="xml">Extensible Markup Language</glossterm> is a new standard… 

your glossary might look like this:

<glossary><title>Example Glossary</title>
⋮
  <glossdiv><title>E</title>

    <glossentry xml:id="xml"><glossterm>Extensible Markup Language</glossterm>
      <acronym>XML</acronym>
      <glossdef>
       <para>Some reasonable definition here.</para>
       <glossseealso otherterm="sgml">
      </glossdef>
    </glossentry>

  </glossdiv>
⋮
</glossary>

Note that the glossterm tag reappears in the glossary to mark up the term and distinguish it from its definition within the glossentry. The xml:id that the glossentry referenced in the text is the ID of the glossentry in the glossary itself. You can use the link between source and glossary to create a link in electronic formats, as we have done with the HTML and PDF forms of the glossary in this book.

You can use the baseform attribute on glossterm and firstterm when the term marked up in context is in a different form, for example, plural. Here is an example:

<para>
  Using <glossterm baseform="DTD">DTDs</glossterm> can
  be hazardous to your sanity.
</para>

2.9.3. Making a Bibliography

There are two ways to set up a bibliography in DocBook: you can have the data raw or cooked. When you use “raw” data, you wrap your entry in the biblioentry element and mark up each item individually. The processor determines the display order and supplies punctuation. When you use “cooked” data, you wrap your entry in the bibliomixed and provide the data in the order in which you want it displayed, and you include the punctuation.

Here’s an example of a raw bibliographical item, wrapped in the biblioentry element:

<biblioentry xreflabel="Kites75">
  <authorgroup>
    <author><firstname>Andrea</firstname><surname>Bahadur</surname></author>
    <author><firstname>Mark</firstname><surname>Shwarek</surname></author>
  </authorgroup>
  <copyright><year>1974</year><year>1975</year>
     <holder>Product Development International Holding N. V.</holder>
     </copyright>
  <isbn>0-88459-021-6</isbn>
  <publisher>
    <publishername>Plenary Publications International, Inc.</publishername>
  </publisher>
  <title>Kites</title>
  <subtitle>Ancient Craft to Modern Sport</subtitle>
  <pagenums>988-999</pagenums>
  <seriesinfo>
    <title>The Family Creative Workshop</title>
    <seriesvolnums>1-22</seriesvolnums>
    <editor>
      <firstname>Allen</firstname>
      <othername role=middle>Davenport</othername>
      <surname>Bragdon</surname>
      <contrib>Editor in Chief</contrib>
    </editor>
  </seriesinfo>
</biblioentry>

The “raw” data in a biblioentry is comprehensive to a fault—there are enough fields to suit a host of different bibliographical styles, and that is the point. An abundance of data requires processing applications to select, punctuate, order, and format the bibliographical data, and it is unlikely that all the information provided will actually be output.

All the “cooked” data in a bibliomixed entry in a bibliography, on the other hand, is intended to be presented to the reader in the form and sequence in which it is provided. It even includes punctuation between the fields of data:

<bibliomixed>
  <bibliomset relation="article">
    <surname>Walsh</surname>, <firstname>Norman</firstname>.
    <title role="article">Introduction to Cascading Style Sheets</title>.
  </bibliomset>
  <bibliomset relation="journal">
    <title>The World Wide Web Journal</title>
    <volumenum>2</volumenum><issuenum>1</issuenum>.
    <publishername>O'Reilly & Associates, Inc.</publishername> and
    <corpname>The World Wide Web Consortium</corpname>.
    <pubdate>Winter, 1996</pubdate></bibliomset>.
</bibliomixed>

Clearly, these two ways of marking up bibliographical entries are suited to different circumstances. You should use one or the other for your bibliography, not both. Strictly speaking, mingling the raw and the cooked may be “kosher” as far as the schema is concerned, but it will almost certainly cause problems for most processing applications.


[1] 

Some formatters are able to establish the link by examining the content of the terms and the glossary. In that case, the author does not need to make explicit links.